page contents

Browse By

No Eaves or Gables? No Worries!

As you probably have figured out, ventilating roof spaces without eaves or gables effectively can be a challenge.

If you don’t have eaves or gables then you basically have two options:

  1. Replacement air from inside the house – via ceiling vents, or;
  2. Replacement air from the roof

Roof Cowl

Replacement air from the inside of the house is quite effective – especially if you are in a two story house – and would like to remove hot air from the upstairs areas. In this case you can kill two birds with one stone, if you have a high capacity roof ventilator! All you need to do is to put some close-able vents into the ceiling – the roof ventilator will then get the necessary replacement air for the roof ventilation from these vents – and at the same time remove the hot air from these rooms!
Eaves Image

Getting replacement air from the roof is less effective than eave vents or gable vents – as the air generally will be warmer on top of your roof than the air available from under the eaves.
There are a number of vents available which can be mounted directly on the roof – unfortunately most of them have very small openings – and therefore require a large number to be installed, which could end up being quite expensive.Roof Ventilation Blog Image

A more cost effective alternative may be to install roof cowls on the lower part of the roof.

If you have a high capacity roof ventilator near the apex of your roof and a number of roof cowls – e.g. near the four corners of the house if it’s not too rectangular in shape – this will give you a relatively good supply of replacement air – although warmer than if you took it from under the eaves or from the gables.

As always if you have any questions about eaves or gables – or anything regarding your roof ventilation worries, we’re here, ready, and happy to help!

Here’s a very helpful article for newcomers – “What are Eaves?

?>